Explosion-proof Heat Resistant Air & Water Cooling Camera

The HB-01F/S series high-temperature-resistant camera has a cooling structure of front-end air chamber and rear-end water chamber. It is a product specially designed for special environments. In high-temperature environments, the chamber is cooled by circulating cooling water. The front-end compressed air forms a wind curtains, which take aways part of the heat and keep the windows clean. This product can be used in places with high ambient temperatures and a lot of dust.

    The water-cooled camera housing is equipped with a water cavity. The cooling water is input from the water inlet at the rear end, and then discharged from the water outlet at the front end through the water cavity, taking away the heat. It can withstand an ambient temperature of about 200°C. The front end of the imager is equipped with an air cavity. Air is introduced from the air inlet at the front end. The compressed air can take away part of the heat through the inner cavity of the protective cover, then it is discharged from the exhaust port. However, the compressed air used is generally only coarse-filtered in the workshop. It is recommended that users add a fine filter before the compressed air enters the camera.

Product Characteristics

● Adopts 2 million pixel 1/2.7" CMOS smart zoom tube network camera

● Minimum illumination: Color: 0.002 Lux @ (F1.2, AGC ON)

● Using deep learning hardware and algorithms to provide accurate pedestrian and vehicle classification, boundary crossing, regional intrusion detection, area entry detection and area exit detection

● Supports detection, capture, scoring, screening of moving faces, and outputs optimal face captures

● The highest resolution can reach 1920 × 1080 @25 fps, and real-time images can be output at this resolution

● Supports backlight compensation, strong light suppression, 3D digital noise reduction, 120 dB wide dynamic range

● Support electric zoom

● Supports up to 256 GB MicroSD/MicroSDHC/MicroSDXC card local storage

● The high-temperature-resistant air (water)-cooled camera cavity adopts cooling air/water circulation for cooling

● The window is made of special explosion-proof glass. The glass surface is treated with nanotechnology. It has high light transmittance, is non-stick to water, non-stick to oil, and repels dust.

● Made of 304 stainless steel

Usage Environment

This explosion-proof camera can be used in some areas of Zone 1 and Zone 2.

The usage scenarios are flammable and explosive places, such as: Oil & Gas, Petrochemical, Coal Mine, Drilling Platform, Military Industry, Marine, Electricity, Aerospace, Medicine, Grain Storage, etc.